The 1360s Quick Release Propellers improve the performance of the Inspire 1 series platform when flying at high-altitude locations. A larger propeller pitch increases the aircraft's propulsion force at altitudes with thinner air.

Note: Do not mix these propellers with other types by mounting them on the same aircraft.

Propeller Safety:
1. The gain values must be adjusted according to the combination of gimbal and motors used:

If the Zenmuse X3 or X5 gimbal and 3510 motors are used, no adjustments are necessary.

If the Zenmuse X5 gimbal and 3510H motors are used, no adjustments are necessary.

If the Zenmuse X3 gimbal and 3510H motors are used, adjustments are required. The recommended gain values are: Pitch = 90*, Roll = 90* and Yaw = 90*.

2. When flying at low-altitude locations, extra propulsion demand from the 1360T props will lead to reduced flight time due to higher battery consumption. The recommended gain values are intended for flight at a low altitude location. Adjust the values according to the immediate environment at your discretion.

When mounting to the Inspire 1, use the DJI Inspire 1 Series - 1345s Propeller Installation Kit.

Barcode # 6958265121111
Shipping Weight 0.1300kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.050m

Be The First To Review This Product!

Help other Camzilla users shop smarter by writing reviews for products you have purchased.

Write a product review