DJI Phantom 4 Advanced+ with 5.5" LCD Display Remote Control
Share This Item
DJI Phantom 4 Advanced+ with 5.5" LCD Display Remote Control
When you buy the DJI Phantom 4 Advanced+ with 5.5" LCD Display Remote Control from Camzilla - the drone experts - you can rest assured that you're ordering from the industry experts with the in-depth product knowledge and an unparallelled level of customer service. We're not just after a quick sale - we're looking to establish long-term relationships with our clients. All of our products are backed by the Manufacturers' Australian Warranty, and we offer free set-up and activation of your drone (if desired) and free technical support for the life of your product.
If you're looking for a Phantom 4 Pro+ but don't need the rear and side object avoidance, and want to save $500, then this is for you!
The new DJI Phantom 4 Advanced+ inherits the same superior camera as the P4 Pro, and the same built-in LCD, but deletes just two features:
- No rear or side sensors.
- No dual-band transmission Lightbridge in the remote controller, just 2.4Ghz band only.
Aside from that, it's the same specification as a P4 Pro+ and includes the same 5.5” 1080p LCD screen mounted onto the remote controller. More than twice as bright as conventional smart phones or tablets, the display is easily visible in direct sunlight.
No mobile device is required, simplifying pre-flight preparations and ensuring you don’t drain your phone battery. The Remote Controller has a battery life of five hours. The DJI GO app is integrated into the screen, meaning hardware and software can be fully optimised and video lag is reduced. The Remote also includes an HDMI port, Micro-SD card slot, microphone and embedded loudspeaker.
It’s WiFi connection allows for images to be edited within the DJI GO App and shared instantly.
The Phantom 4 Advanced+ boasts a professional-grade camera with capabilities significantly greater than any of its predecessors. The camera contains a 1” CMOS sensor (4 times larger than the Phantom 4 camera sensor) capable of 4K video at 60fps and improved low light performance. The larger sensor size results in a greater dynamic range. This means the camera will be better able to balance and resolve differences between light and dark. This is a common problem in aerial footage, when you often have a brightly lit sky against dark terrain below.
To record as much hi-res data as possible in each frame, the Phantom 4 Advanced+ increases the 60Mbps bitrate of the Phantom 4 to a significant 100Mbps.
Many drone cameras also struggle with the ‘rolling shutter’ effect, which can give a jello-like shake to footage, especially when filming quick pans or chasing fast-moving subjects. The mechanical shutter of the Phantom 4 Advanced+ helps eliminate this.
The new ability to adjust the lens aperture gives filmmakers greater control over depth of field in their images. The electronic shutter has also been improved with a max shutter speed of 1/8000-second.
The 20MP camera can now shoot 14 photos per second in burst mode and capture slow motion video at 60 frames per second in 4K resolution, and 120FPS at 1080P. The Phantom 4 Advanced+ camera has an aerial-optimized f/2.8 wide-angle lens with a 24 mm equivalent focal length. It features eight elements that fit into a smaller, more compact frame. Images are consistently detailed with low distortion, ensuring photos and videos are sharp and vivid.
Other features include:
- A magnesium-alloy constructed hull for reduced weight and increased rigidity of the frame.
- Improved 30 minute battery life.
- Improved sensor redundancy: Dual compass modules and dual IMU units keep your flight steady and reliable.
- Now accepts up to 128Gb MicroSD cards
The Phantom 4 Advanced+ includes all of the revolutionary Intelligent Flight Modes introduced in the Phantom 4, as well as a few new ones. These include:
With Draw, simply draw a route on screen and the Phantom 4 Advanced+ will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios:
Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
With Gesture Mode, computer vision technology allows the Phantom 4 Advanced+ to take instructions through gestures. The subject simply lifts their arms when facing the camera and the aircraft will recognize this movement by locking on and placing the subject in the centre of the frame. When ready for a photo, the subject holds their arms out to signal the aircraft. A three second countdown will begin, making time to strike a pose, allowing moments to be captured without the remote control.
Following fast-moving objects can be very challenging, but advanced, image-recognition algorithms used by the Phantom 4 Advanced+ allow it to recognize and track an object while keeping it in frame. This algorithm also recognizes a range of subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots.
Fly in any direction visible on-screen (except backwards) with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles and tap the screen again or use control sticks to change direction.
An AR route function shows the aircraft's real-time flight direction for reference as its route is adjusted. As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Advanced+ or tilt the gimbal as required without changing the direction of flight.
Return to Home
In its Return to Home mode, the Phantom 4 Advanced+ can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 Advanced+ is also able to adjust its flight path to avoid obstacles it has seen during its flight.
At takeoff, the Phantom 4 Advanced+ will record the scene below and compare its recording with what it sees as it returns, for more precise landing.
It can also detect the ground to see whether there is suitable spot for landing. If any obstacles are found, or there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
With this new camera, this Phantom easily surpasses all previous Phantoms except the Phantom 4 Pro.
If you'd like to add the DJI Care Refresh policy to your order, just select it in the Option box below.
Be The First To Review This Product!
Help other Camzilla users shop smarter by writing reviews for products you have purchased.