Insta360 GO 3S / GO 3 Pivot Stand

Insta360 GO 3S / 3 Pivot Stand

• Mount anywhere with the reusable sticky base.
• New, flexible base can be stuck to flat or slightly curved surfaces.
• Universal 1/4'' mounting point for use with other accessories.
• Magnetic latch to mount both the camera and the Action Pod.
• Adjustable ball joint for flexible shooting and creative angles.

Compatibility: GO 3S, GO 3

Notes

1. Please read the instructions on the sticker before using this product for the first time.
2. The base of the Pivot Stand can be removed to connect other accessories using the 1/4" mounting point, such as a selfie stick.
3. When removing the Pivot Stand from a surface, peel from the edge of the base. Do not pull from the center.
4. The back of the camera releases heat and may become hot during use. Avoid touching the camera when it is hot, and allow it to cool down after use.
5. Please keep the storage cover clean, as the sticky base will become weaker if exposed to dust or dirt. If the base is no longer sticky, wash and dry it in the sun, then reuse.
6. The Pivot Stand’s sticky base is recommended for use at temperatures between 0°C and 40°C. For best results, after sticking the Pivot Stand to the desired surface, leave it for 30 minutes before attaching the camera.
7. This accessory contains magnets. If you have a pacemaker, please do not use this accessory due to its magnetism.
8. Please avoid using the Pivot Stand in high-intensity action environments, such as those with high vibrations, and do not attach it to surfaces that vibrate. Doing so may cause your camera to fall and be damaged.