• 1 TX to 8 RX With Control, Multi-Group Transmission ^[1]
• Auto Channel 2.0 ^[2] for Seamless, Stable Feed
• TX/RX Switchable for Flexible Deployment
• Pairing-Free Connection for Fast Camera Switching
• Supports Ronin ^[6] Monitoring & Control
• DCI 4K/60fps 10-bit HDR Wireless Transmission

Take a Closer Look

1 TX to 8 RX With Control, Multi-Group Transmission ^[1] A single transmitter feeds up to eight receivers, each with remote control. Up to five transmitters and 40 receivers can operate simultaneously. Even in complex on-set environments, the wireless camera feed stays stable without sacrificing 4K image quality ^[3]. Auto Channel 2.0 ^[2] for Seamless, Stable Feed With Auto Mode enabled, transceivers recognize one another and intelligently coordinate frequencies. More accurate spectrum scanning and conflict diagnostics allow each unit to hop frequencies seamlessly ^[9] as conditions change, maintaining a stable connection despite interference, even with multiple systems running side by side. SDR, Evolved It transmits DCI 4K/60fps, 10-bit HDR ^[3], and H.265 video at bitrates up to 50 Mbps ^[10] for ultra-high-definition monitoring. The transmission range reaches up to 4 km ^[4], easily handling everything from stadiums to dynamic car shoots. With latency as low as 35 ms ^[5], the video feed is near-instant, making remote commands like focus pulls and gimbal moves highly responsive. TX/RX Switchable The transceiver design lets you switch between TX and RX on the fly. There is no need to decide your TX-to-RX ratio in advance, so every unit adapts to whatever the shoot calls for. Weighing only about 136 g, the unit reduces the load on handheld gimbals and mounts easily across a wide range of camera setups. It also provides 1 HDMI and 2 USB-C ports. Pro Monitoring, Flexible Output Quickly switch between camera feeds directly from the transceiver or the DJI Ronin app. Output the ultra-high-definition, low-latency video feed to pro monitors via SDI ^[11], HDMI, or DP ports. You can also connect a smartphone or tablet to the receiver ^[12] via USB-C for a stable, high-bitrate wired monitoring feed. Ronin Ecosystem ^[6] and Beyond When paired with DJI RS series gimbals ^[6], you can wirelessly control gimbal movements and trigger recording with your smartphone. Connect to DJI Ronin 2 and Master Wheels ^[6] to precisely control heavy cinema cameras on car mounts or crane rigs. Or, link an Osmo Action or Pocket series device ^[7] for a lightweight setup to capture sports and other unique angles.

In the Box

DJI SDR Transmission 2 Expansion Plate (SDI/HDMI/USB-C) × 1	DJI SDR Transmission 2 Camera Cold Shoe Adapter × 1
D-TAP to USB-C Power Cable (50 cm) × 1	Ball-End Hex Key (2 mm) × 1
DJI SDR Transmission 2 Transceiver Cage × 1