RAM® Locking Powered Dock for Honeywell ScanPal EDA10A
$450.00
In stock
Device holder: universal holder.
RAM ball size guide
The letter in a RAM part number is the ball size. Every part in a mount must use the same ball size. C size parts carry no letter, so RAM-201U is a C size arm and RAM-B-201U is the B size version.
| Size | Ball diameter | Holds up to | Best for |
|---|---|---|---|
| A | 9/16" (14 mm) | 0.45 kg | Small cameras, action cams, remotes |
| B | 1" (25 mm) | 0.9 kg | Phones, GPS units, small tablets. The most common size. |
| C | 1.5" (38 mm) | 1.8 kg | Tablets, small monitors, rugged devices |
| D | 2.25" (57 mm) | 2.7 kg | Large displays and laptops |
| E | 3.38" (86 mm) | 6.8 kg | Heavy monitors and equipment |
Arm length sets the reach. Short keeps the device close and rigid, Medium suits most installs, Long is for extra reach. If in doubt, choose Medium.
Overview
The RAM® Locking Powered Dock for Honeywell ScanPal™ EDA10A (RAM-HOL-HON11PKLU) features a form-fit design specifically for the Honeywell ScanPal™ EDA10A tablet with the OEM protective boot. This powered holder allows you to keep the device charged through the pogo pin contacts when the device is docked—power is provided by connecting to the dock's 5.5mm DC power jack. It is compatible with the OEM hand-strap accessory and requires that the protective boot is installed for a secure fit. Take your solution a step further with a variety of compatible RAM® accessories, such as the RAM® NFC Extender and RAM® Vent-Temp™. This tablet holder includes a 4-hole AMPS and 75mm x 75mm VESA pattern on the back as connection points for attaching a double socket arm to complete your mounting solution. Secure any peripheral accessories or devices directly to the dock by mounting them to one of the two built-in 2-hole mounting locations compatible with the RAM® 2-hole diamond base.
Features
- Locking, spring-loaded, powered dock featuring GDS® Technology™ with charging capabilities for the ScanPal™ EDA10A tablet (protective boot required)
- When connected to a power source via 5.5 DC Barrel connector, integrated pogo pins provide power to the device
- Compatible with OEM handstrap, RAM® NFC Extender, and RAM® Vent-Temp™
- Two built-in 2-hole mounting locations for additional device mounting such as a phone; compatible with RAM® 2-hole diamond bases and accessory side bracket
- Backed by a 3-year warranty
Hardware Included
(2) Keys
(6) #8-32 x 5/8” Machine Screws
(6) #8-32 Nyloc Nuts
(4) #10-24 x 5/8” Machine Screws
(4) #10-24 Nyloc Nuts
(1) Cable Clamp & Zip Tie Kit
Hole Pattern
75 x 75mm VESA
4-Hole AMPS: 1.181" x 1.496"
Materials
High strength composite
Packaging Type
Poly Bag
Input Voltage
5 VDC
Input Connector
5.5mm DC Connector
Input Cable Length
1 Meter
Certifications
FCC, CE, RoHS, WEEE
Mavic 4 Pro
RS 5
RS 2
RSC 2
Osmo Pocket 4P
Luna Ultra
X4 Air
X4
ONE X2
ONE X
GO 2
Power 1000 Mini
Power 2000
Power 1000
