GO Ultra Dive Case

• Waterproof protection for GO Ultra up to 197ft (60m).
• Glass lenses for high-quality imaging while underwater.
• Buckle locking mechanism and rubber seal keep the camera safe and secure.
• Universal cold shoe mount for fill lights and other accessories.
• Includes L-Shape Adapter for vertical shooting.

Compatibility

GO Ultra

 

AU$104.99

 

 

Dive Case

Dive deeper, capture more.

 

World class waterproofing.

The robust frame and high-quality sealing allow you to film freely to a depth of 197ft (60m).

 

Crystal clear capture.

Never miss a moment with the hydrophobic, oil-resistant glass lens.

 

Submarine safety.

Dual buckle lock and rubber seal safety measures guarantee your camera is protected at all times.

 

Add awesome accessories.

With the built-in cold shoe mount, you can add easily attach fill lights and other aquatic accessories.

 

Tested to perfection.

Each Dive Case undergoes rigorous testing to ensure it meets our safety and quality standards.

Notes

1. Improper maintenance may affect product performance. To ensure the Dive Case is operating correctly, test it before each use by shutting the case and immersing it in water for 3 minutes. Then, use a soft, dry cloth to wipe the Dive Case. Open the case and check that there is no moisture inside. If there is, do not use the case.
2. Avoid submerging the Dive Case in deep water without the camera inside. High water pressure may cause damage to the Dive Case.
3. It is not advised to use the Dive Case underwater for longer than 1 hour. Prolonged exposure to water pressure increases the risk of water ingress.
4. Before placing the camera in the Dive Case, ensure that the camera lens and the inside of the case are clean.
5. When closing the Dive Case, ensure that rubber seal is intact and in good condition, and the parts in contact with the seal are clean and free of sand, dirt, dust, and other particulate matter.
6. Do not open the Dive Case in a location with a lot of sand, dirt, dust, or other particulate matter which could damage the inside of the case or the camera.
7. After closing the Dive Case, check that the rubber seal is fully closed and that there is no particulate matter stuck inside the Dive Case.
8. The Dive Case is not shock-resistant. Applying strong vibrations, shocks, or pressure to the case may result in damage, failure, or reduced waterproofing performance. Avoid using the Dive Case in high-intensity activities where strong impacts are likely to occur.
9. Do not open the Dive Case when it is wet.
10. After using the Dive Case in saltwater, clean the case with a soft, dry cloth, remove the camera, then close the case and soak it in fresh water for 5–10 minutes. If the Dive Case is not soaked after being used in saltwater, residual salt may damage the waterproofing. After soaking the Dive Case in fresh water, rinse it gently under a faucet. Do not apply high-pressure water jets, as this may damage the waterproofing of the Dive Case.
11. Ensure that the Dive Case is firmly closed before washing. After washing the Dive Case, wipe away any water droplets remaining on the surface with a soft, dry cloth. Do not dry it with a hair dryer, clothes dryer or stove.
12. Ensure there is no sand on the Dive Case before drying. Sand may scratch the product surface when wiped with a cloth.
13. Do not store the Dive Case in a hot and humid environment.
14. Do not wash the Dive Case with soap, neutral detergent or alcohol cleaning products. This may degrade the waterproofing performance.
15. Do not clean the Dive Case with organic solvents (such as diluents, alcohol or gasoline).