X5 Water Sports Rope Mount

• Easily fixes to ropes or lines for epic kitesurfing and wakeboarding shots.
• Stays invisible in 360 footage for impossible third-person angles.
• Fixes horizontally to prevent the camera from spinning.
• Mount onto a sturdy rope with a diameter between 1–8mm (0.03–0.31in).

Compatibility

X5

 

Water Sports Rope Mount

Made for the waves.

 

Ride in style.

Installs easily on your wakeboard or kiteboard for premium shots.

 

Designed to stay invisible.

Stays completely invisible in 360 footage. Get unobstructed third-person perspectives with no impact on performance.

 

Multiple mounting points.

The metal frame fixes the camera in a horizontal position to stop it from spinning, with a new buckle design for even more security.

 

Unlock your creativity.

Mount onto a sturdy rigging rope with a diameter between 1–8mm (0.03–0.31in) for next-level shots.

Note: Designed only for kite/wakeboarding-specific lines of 1–8mm diameter (0.04–0.31 in). Not recommended for other line types.

Notes

1. Suitable rope and line diameter ranges for this mount are between 1mm - 8mm. Ensure that the rope is in good condition, and the strength of the rope and line meets the standard of the sport.
2. Please read the camera's waterproof safety instructions carefully before use. Make sure to properly close the battery lock and the USB lock cover. Strong vibrations, shock, or pressure to the camera may compromise its waterproofing performance.
3. For Kitesurfing, please follow the mounting instructions in this manual and ensure that the safety line is not secured to the screw-fixing side.
4. The optimal mounting position for Kitesurfing is 20cm-30cm away from the rope knot. If the lines are too far apart, it will affect the installation of the mount.
5. When kitesurfing, the installation position should avoid the area where the rope is easily entangled to avoid affecting your control.
6. When kitesurfing, please pay attention to avoid rope entanglement. If this occurs, stop kitesurfing immediately.
7. Gently open the tow rope buckles when attaching the mount to the tow rope. Do not excessively open the tow rope buckles with force.
8. It is recommended to remove the lens guards when surfing to avoid water or wet fog in the lens guards, affecting the shooting experience.
9. This accessory is only compatible with Insta360 X5. Do not use this mount with other cameras. While using this mount, try to avoid hitting or scratching your camera lens.
10. Follow this manual and our official tutorial videos. Do not DIY your camera with other accessories.