DJI Phantom 4 Pro+ V2.0 IN STOCK NOW
Twice as bright as a phone or tablet!
Sold Out - Backorder Available
Share This Item
When you buy the DJI Phantom 4 Pro + V2.0 from Camzilla - the drone experts - you can rest assured that you're ordering from the industry experts with in-depth product knowledge and that you'll receive an unparallelled level of customer service. We're not just after a quick sale - we're looking to establish long-term relationships with our clients. All of our products are backed by the Manufacturers' Australian Warranty, and we offer free set-up and activation of your drone (if desired) and free technical support for the life of your product.
The DJI Phantom 4 Pro+ V2.0 is identical to the Phantom 4 Pro V2, except that it includes a 5.5” 1080p LCD screen mounted onto the remote controller. More than twice as bright as conventional smart phones or tablets, the display is easily visible in direct sunlight.
No mobile device is required, simplifying pre-flight preparations and ensuring you don’t drain your phone battery. The Remote Controller has a battery life of five hours.
The DJI Go4 app is integrated into the screen, meaning hardware and software can be fully optimised and video lag is reduced. Please note that the display does not currently support apps other than DJI Go4
The Remote also includes an HDMI port, Micro-SD card slot, microphone and embedded loudspeaker.
Its WiFi connection allows for images to be edited within the DJI GO App and shared instantly.
DJI has taken its most popular drone - The Phantom 4 Pro - and has refined and improved it. The result is the Phantom 4 Pro V2.0. This new drone introduces the following features:
- The Occusync HD transmission system replaces the Lightbridge system, allowing for an effective control range of up to 7 km (4 km in Australia). Automatic dual-frequency (2.4 and 5.8 GHz) band switching and wireless connectivity to the DJI Goggles are also supported.
- New aerodynamic 9455S propellers and new FOC ESC drivers result in increased stability and a quieter Phantom. The net result is a noise reduction of up to 4 DB (60%).
The Phantom 4 Pro+ V2.0 is equipped with the same 1-inch 20 - Megapixel sensor that's found in the Phantom 4 Pro and Phantom 4 Advanced, so it's capable of shooting 4K/60fps video and Burst Mode stills at 14 fps. Its Flight Autonomy system includes dual rear vision sensors and infrared systems, for a total of five directions of obstacle sensing and four directions of obstacle avoidance.
DJI’s Phantom quadcopter range has always included quality cameras that get the job done. Like the Phantom 4 Pro, the Phantom 4 Pro + V2.0 completely eclipses this, boasting a professional-grade camera with capabilities significantly greater than any of its predecessors.
The camera contains a 1” CMOS sensor (4 times larger than the Phantom 4 camera sensor) capable of 4K video at 60fps and improved low light performance. The larger sensor size results in a greater dynamic range. This means the camera will be better able to balance and resolve differences between light and dark. This is a common problem in aerial footage, when you often have a brightly lit sky against dark terrain below.
And to record as much hi-res data as possible in each frame, the Phantom 4 Pro+ V2.0 increases the 60Mbps bitrate of the Phantom 4 to a significant 100Mbps.
The new ability to adjust the lens aperture gives filmmakers greater control over depth of field in their images. The mechanical shutter has also been improved with a max shutter speed of 1/2000 of a second - eliminating the rolling shutter distortion that may occur while shooting fast-moving subjects or during high-speed flight.
The Phantom 4 Pro+ V2.0 camera has an aerial-optimized f/2.8 wide-angle lens with a 24 mm equivalent focal length. It features eight elements that fit into a smaller, more compact frame. Images are consistently detailed with low distortion, ensuring photos and videos are sharp and vivid.
Other features include:
- A magnesium-alloy constructed hull for reduced weight and increased rigidity of the frame.
- 30 minute battery life.
- Upgraded DJI LightBridge HD 5.8GHz transmission system for greater signal strength in areas with high 2.4GHz frequency use or interference.
- Improved sensor redundancy: Dual compass modules and dual IMU units keep your flight steady and reliable.
- Accepts up to 128Gb MicroSD cards
The Phantom 4 Pro includes all of the revolutionary Intelligent Flight Modes introduced in the Phantom 4, as well as a few new ones. These include:
With Draw, simply draw a route on screen and the Phantom 4 Pro+ V2.0 will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios:
Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
With Gesture Mode, computer vision technology allows the Phantom 4 Pro+ V2.0 to take instructions through gestures. The subject simply lifts their arms when facing the camera and the aircraft will recognize this movement by locking on and placing the subject in the centre of the frame. When ready for a photo, the subject holds their arms out to signal the aircraft. A three second countdown will begin, making time to strike a pose, allowing moments to be captured without the remote control.
Following fast-moving objects can be very challenging, but advanced, image-recognition algorithms used by the Phantom 4 Pro allow it to recognize and track an object while keeping it in frame. This algorithm also recognizes a range of subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots.
Fly in any direction visible on-screen with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles and tap the screen again or use control sticks to change direction.
An AR route function shows the aircraft's real-time flight direction for reference as its route is adjusted. As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Pro or tilt the gimbal as required without changing the direction of flight.
Return to Home
In its Return to Home mode, the Phantom 4 Pro+ V2.0 can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 Pro+ V2.0 is also able to adjust its flight path to avoid obstacles it has seen during its flight.
At takeoff, the Phantom 4 Pro+ V2.0 will record the scene below and compare its recording with what it sees as it returns, for more precise landing.
It can also detect the ground to see whether there is suitable spot for landing. If any obstacles are found, or there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
With this new camera, this Phantom easily surpasses all previous Phantoms. Check out the Phantom 4 Pro introductory video.
Click HERE if you'd like to add the DJI Care Refresh policy to your order.
Be The First To Review This Product!
Help other Camzilla users shop smarter by writing reviews for products you have purchased.