Created for outdoor aerial imaging, the DJI CrystalSky Ultra monitor features an ultra-bright screen that is clearly visible in sunlight.

It is designed from the ground up to work seamlessly with the DJI GO or DJI GO 4 app, giving camera operators total control.

A maximum 2000 cd/m² of brightness means the CrystalSky Ultra monitor is more than four times as bright as typical mobile devices and twice as bright as the regular CrystalSky monitor.

On-screen details are clear and sharp, and colors are vibrant, giving the quality needed to fine tune image composition.

A dedicated Sunlight Readability Enhancement mode is especially designed for processing the image in real-time to ensure more comfortable viewing under bright light.

 

SMOOTHER VIDEO DISPLAY

The CrystalSky monitor optimizes video decoding in real-time.

Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.

 

CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4

A newly designed operating system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times.

Its embedded DJI GO/DJI GO 4 app provides full access to all app features, including aircraft parameter adjustment, camera control, footage management and playback.

And using offline maps, they can be kept available even if going out of Wi-Fi reach.

 

POWER SUPPLY

A two-cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices.

It supports quick charge, and controls its discharge rate even in low temperatures.

It has a maximum operation time of 4-5 hours.

 

DUAL SD CARD SLOTS

Equipped with dual MicroSD Card slots, the CrystalSky monitor’s back-up storage can be extended, and card-recorded footage can be played back directly on the monitor.

Using editors built in to the apps, high-quality edits can be made quickly and instantly shared to social media.

The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port. Resolution is 2048 x 1536.

 

PORTS AND NETWORK

The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it's also compatible with 4G dongles and USB storage through its USB-A port.

When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands. Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.

 

EXTREME TEMPERATURE OPTIMIZED

Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -20°C and, with its internal cooling system, functions normally in temperatures as high as 40°C.

DJI SYSTEM COMPATIBILITY

The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, via the optional mounting bracket. 

The CrystalSky can only attach to an existing remote controller using the optional RC Mounting Bracket.

But CrystalSky attaches to the Cendence remote controller without an additional mounting bracket.

And the CrystalSky does NOT ship with a battery charger, only a charging hub. It requires your drone's charger to charge its batteries.

 

IN THE BOX

7.85" Ultra High Brightness CrystalSky Monitor
2 x Intelligent Batteries
Intelligent Battery Charging Hub



COMPATIBILITY

  • Mavic Pro
  • Phantom 4 Series 
  • Phantom 3 Series (not Standard)
  • Inspire Series
  • Osmo (not Mobile)
  • Osmo+
  • Osmo Pro
  • Osmo RAW
  • Osmo Pro/RAW - Wired Video Adapter
  • CrystalSky - Osmo Pro/RAW Mounting Bracket
  • Cendence Remote Controller
  • CrystalSky - Remote Controller Mounting Bracket

 

Compatible Battery Chargers:

  • Inspire 2 Battery Charger (IN2C180)
  • Inspire 2 Battery Charger (ADE018)
  • Inspire 2 Car Charger (C6S90-2)
  • Inspire 1 100W Battery Charger (A14-100P1A)
  • Inspire 1 180W Battery Charger (ADE018)
  • Inspire 1 Car Charger (C6S90)
  • Phantom 4 Series Battery Charger (PH4C100)
  • Phantom 4 Series 160W Battery Charger (PH4C160)
  • Phantom 4 Car Charger (C6S90)
  • Phantom 3 Professional Battery Charger (ADE019)
  • Phantom 3 Car Charger (C4S90)
  • *Phantom 3 57W Battery Charger (A14-057N1A)
  • *Osmo 57W Battery Charger (A14-057N1A)


*NOTE: The 57W battery charger does not supply enough power to charge batteries and other devices connected to the USB port simultaneously. DO NOT use the USB port to charge another device when charging batteries.

If you like the screen on the Phantom 4 Pro Plus, you'll love the CrystalSky Ultra. It's bigger, twice as bright, and has far more features!

SKU DJICRYSTAL7ULTRA
Brand DJI
Shipping Weight 1.8000kg

Be The First To Review This Product!

Help other Camzilla users shop smarter by writing reviews for products you have purchased.

Write a product review

You May Also Like