DJI Matrice 400 Worry-Free Plus Combo

AUD $18,550

  • Extended Flight Time, Dust and Water Resistant

  • Upgraded Payload Capacity and Multi-Payload Support

  • Power-Line-Level Obstacle Sensing, Safer Flight

  • Enhanced Intelligence and Efficiency

  • Easier Automated Operations

  • Comprehensive Accessory Upgrades

 

 

 

Let’s Answer Your Questions

  • What is the ingress protection (IP) rating of DJI Matrice 400? Can I fly the drone in the rain?

    It is IP55 rated. Do not fly in rain heavier than 100 mm/24 hr.

    The IP rating is not permanently effective and may decrease due to product wear and tear.

  • Which payloads are compatible with DJI Matrice 400?

    Gimbal Cameras: Zenmuse H30, Zenmuse H30T, Zenmuse L2 and Zenmuse P1

    Functional Accessories: Zenmuse S1 Spotlight, Zenmuse V1 Speaker, Manifold 3, DJI RC Plus 2 sub2G SDR Module, DJI Cellular Dongle 2

    RTK Station: D-RTK 3 Multifunctional Station, D-RTK 2 Mobile Station

    Ecosystem Accessories: DJI X-Port

    DJI E-Port V2 Development Kit

    DJI E-Port V2 Coaxial Cable Kit

    DJI SKYPORT V3 Adapter Set

    DJI SKYPORT V3 Coaxial Cable Kit

     

    Can I use the accessories of DJI Matrice 400 on Matrice 350?

    Accessories for DJI Matrice 400 and Matrice 350 are not compatible with each other.

    How long does it take to fully recharge one TB100 Intelligent Flight Battery?

    With a 220 V power supply: In fast charging mode, it takes approximately 45 minutes to fully recharge one DJI Matrice 400 battery. In silent mode, it takes approximately 110 minutes to fully recharge one DJI Matrice 400 battery.

    With a 110 V power supply: In fast charging mode, it takes approximately 70 minutes to fully recharge one DJI Matrice 400 battery. In silent mode, it takes approximately 110 minutes to fully recharge one DJI Matrice 400 battery.

    Charging time is measured in a test environment with a temperature of 25° C.

    How to upgrade the firmware of DJI Matrice 400?

    The following methods can be used to upgrade the firmware:

    1. Connect the aircraft to the computer to upgrade the firmware of the aircraft and remote controller through DJI Assistant 2 (Enterprise Series).

    2. Use DJI Pilot 2 to update the firmware of the aircraft, remote controller.

    3. Visit the official DJI website to download the offline firmware update package for the aircraft and remote controller. Then, insert the SD card storing the firmware package into the remote controller for offline update.

 

SKU DJIM400COM1
Brand DJI
Shipping Weight 24.0000kg
Shipping Width 1.000m
Shipping Height 0.400m
Shipping Length 0.800m
Shipping Cubic 0.320000000m3

Be The First To Review This Product!

Help other Camzilla users shop smarter by writing reviews for products you have purchased.

Write a product review