GO Ultra Pivot Stand

• Mount anywhere with the reusable sticky base.
• Flexible base can be stuck to flat or slightly curved surfaces. Newly designed ergonomic design makes it easier to pick up and use.
• Universal 1/4" mounting point for use with other accessories.
• Magnetic latch compatible with standalone GO Ultra camera and the Action Pod.
• Adjustable ball joint for flexible shooting and creative angles.

 

Compatibility

GO Ultra

 

AU$52.99

 

 

Pivot Stand

Mount anywhere, move freely.

 

Unlimited possibilities.

Stick anywhere you can think of, then just wash the sticky base and go again! The bottom even has a 1/4" screw point for more mounting options.

*The sticky base must be applied to a dry, flat surface or a surface with slight curvature.

Keep it together.

Flip design base keeps the protective cover on hand at all times.

Stays locked in.

Mount the Action Pod or the standalone camera and get creative! The magnetic, fixed claw latch keeps both securely attached, with quick assembly and disassembly.

Every angle. Every possibility.

Easily change the angle with the adjustable ball joint for endless creative angles.

Notes

1. The Pivot Stand contains magnets. Keep it away from pacemakers and other devices to avoid interference.
2. Before use, read the instructions on the Pivot Stand sticker. Remove the sticker after reading.
3. The Pivot Stand base can be removed to connect other accessories via the 1/4" mounting point, such as a selfie stick.
4. The sticky base is designed for use in temperatures between 32°F–104°F (0°C–40°C). Let it sit for 30 minutes after application to reach maximum strength.
5. When removing the Pivot Stand, lift from the lift tab of the base. Do not pull the Pivot Stand directly.
6. Stick the Pivot Stand to smooth surfaces such as glass or metal. Avoid rough and uneven surfaces such as wood grain or concrete.
7. Stick the Pivot Stand to stable surfaces. Avoid attaching it to surfaces that move or vibrate, as this may cause the camera to fall.
8. Avoid attaching the Pivot Stand to high-temperature areas (such as a car's front windshield) for extended periods as the adhesive may become difficult to remove.
9. The back of the camera dissipates heat and may get hot during use. Avoid touching the camera when it is hot and let it cool down after use.
10. When not in use, flip the protective cover over the sticky base to keep it clean. If the adhesive loses stickiness, rinse it with water and allow to dry before reusing.
11. Avoid using the Pivot Stand during high-intensity activities. Sudden movements like jumping or rapid rotation may cause it to detach.